INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES国际粘附与粘合剂杂志
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES(英文缩写 INT J ADHES ADHES),ISSN 0143-7496,eISSN 1879-0127,中文译名:国际粘附与粘合剂杂志 是一本学术期刊。本页汇总该期刊的最新影响因子、分区信息以及最新收录于 PubMed 的文献,帮助您快速了解期刊全貌。
发文量统计区间：2025-11-01 至 2026-10-31，按本站收录文献的发表日期统计。
期刊介绍
历年影响因子趋势
| JCR 数据年份 | 影响因子 | JCR 分区 |
|---|---|---|
| 2021 | 3.848 | Q2 |
| 2022 | 3.400 | Q2 |
| 2023 | 3.200 | Q2 |
| 2024 | 3.500 | Q2 |
| 2025 | 4.000 | Q2 |
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES 最新收录文献
-
1. {"_":" performance of 2-step, total etch adhesives modified by thiourethane additives.","i":["In vitro"]}
PMID:日期:2020-08-02Thio-urethane oligomeric additives have been shown to improve the mechanical properties of dental composites and resin cements. To try to harness those same properties in dental adhesives, in this study, these oligomers (TU) were added to the matrix and/or as filler functionalization of experimental adhesives, and the effects on conversion and mechanical properties were analyzed. BisGMA and HEMA (60/40 wt%) were used as the monomer matrix, made polymerizable by the addition of 0.2 wt% 2,2-dimethoxy-2- phenylacetophenone. 2,6-di--butyl-4-methylphenol was added at 0.5 wt% as the inhibitor. This material was used as the unfilled control (BH). TU oligomers were added at 20 wt % to the matrix (BH+20%TU, unfilled) and/or used as filler functionalization (TF, 10 wt%). Fillers functionalized with methacrylate (MF, 10 wt%) served as the control. The experimental adhesives groups containing fillers were: BH+10%MF; BH+10%TF; BH+20%TU+10%MF; BH+20%TU+10%TF. Flexural properties were tested in three-point bending (wet and dry). Polymerization kinetics was followed in real-time in near-IR. Water Sorption/Solubility (WS/SL, ISO 4049) and Viscosity (rotational rheometry) were also evaluated. For Microtensile bond strength 40 vol% ethanol was added to adhesives, which was applied onto sound dentin from third human molars. The data were analyzed with one-way ANOVA and Tukey post-hoc test, and test t for the comparison between storage time of the microtensile bond strength test (alpha = 0.05). There was no significant difference between groups when yield strength (YS) and flexural modulus (FM) were evaluated in dry conditions. After water storage, all the groups containing TU in the matrix showed statistically lower YS/FM values. This was true in spite of the statistically higher conversion for those same groups. The maximum rate of polymerization (Rpmax) was higher for BH+10%TF and no significant difference was found for the groups BH and BH+10% MF. The lowest Rpmax values were found for BH+20%TU+10%TF and BH+20%TU. BH+20%TU+10%TF showed the highest viscosity values followed by BH+20%TU+10%MF and BH+20%TU, with statistically significant difference between them. For the microtensile bond strength test at 24h (p = 0.13) and 6 months (p = 0.11) and WS/SL (p 0.05), no significant difference was found among groups. The storage time (24 h and 6 months) did not affect the microtensile bond strength results. In spite of improving the conversion, the addition of TU in the matrix reduced the mechanical properties of the adhesives tested after water storage. This did not affect the bond strength at 24 h or 6 months.
-
2. Tertiary Amine and Tooth Mineral Hydroxyapatite Facilely Trigger Self-cure of 10-MDP Based Adhesives.
2. 叔胺与牙齿矿物羟基磷灰石简便触发基于10-MDP的粘合剂的自我固化PMID:日期:2019-05-15The present work aims to investigate if a novel self-cure system, mediated by tertiary amine ethyl 4-(dimethylamino)-benzoate (4E) and tooth mineral hydroxyapatite (HAp), would trigger polymerization of model adhesives based on a popular self-etch monomer, 10- methacryloyloxydecyl dihydrogen phosphate (10-MDP). The effect of 4E and HAp contents on degree of conversion (DC), polymerization rate (Rp), and induction period (IP) was investigated. The occurrence of such self-cure phenomenon in adhesives that underwent prior inadequate light cure was also evaluated. Model self-etch adhesives were prepared by using a monomer mixture of 10-MDP with 2-hydroxyethyl methacrylate at1:1 wt. ratio. 4E (0.3-1.3 wt%), and HAp (0.5-2 wt%) were added to the mixture. Benzoylperoxide and N,N-dihydroxyethyl-p-toluidine were used as conventional chemical-cure system, and trimethylbenzoyl-diphenylphosphine oxide as light-curing photoinitiator. The polymerization processes and mechanical properties of model adhesives were evaluated by real time ATR/FT-IR and nanoindentation, respectively. The 4E- HAp system successfully triggered self-cure of 10-MDP based model adhesives. DC, Rp and IP were apparently affected by both 4E and HAp contents. DC of self-cure of the model adhesives was much higher than that of the conventional chemical-cure system. 4E-HAp initiated self-cure further boosted DC to ~100% regardless of prior light exposure, and significantly improved elastic modulus and hardness, thus provided a novel polymerization method to effectively salvage curing of the adhesives after inadequate light-cure.
-
3. Methacrylate saccharide-based monomers for dental adhesive systems.
3. 用于牙科粘接系统的甲基丙烯酸酯基糖类单体PMID:日期:2018-09-26The aim of this study was to synthesize three new methacrylate monomers based on the modification of saccharides structures (glucose-Gluc, sucrose-Sucr and chitosan-Chit) with glycidyl methacrylate, and to use them in the composition of dental adhesives. Three methacrylate saccharide monomers were synthesized and characterized by mid-IR, H and C NMR, antioxidant activity and cytotoxic effect. Monomers included: one monosaccharide - Gluc-MA; one disaccharide - Sucr-MA; and one polysaccharide - Chit-MA. containing HEMA, methacrylate saccharide monomers at concentrations of 0 (control), 1, 2 or 4 wt%, 60 wt% ethanol aqueous solution (pH3.0) and initiator system were formulated. Primers were used in conjunction with a bond step and composite paste to restore caries-free third molars, and dentin bond strength (24 hours and 6 month of storage in water), and antimicrobial activity (Alamar Blue test) were tested. Degree of conversion (DC) and maximum rate of polymerization (Rp) of the primers themselves were also analyzed. The mid-IR, H and C spectrum confirmed the presence of vinyl group on the structure of saccharides. Chit-MA showed low antioxidant activity and did not present a cytotoxic effect. Gluc-MA and Sucr-MA possess antioxidant and cytotoxic activity, concentration dependent. In the presence of methacrylate saccharide monomers, the showed DC comparable to the control group, except Gluc-MA4%, Sucr-MA4% and Chit-MA1%, which showed a range of 64.6 from 58.5 %DC. Rp was not statistically different for all the groups ( = 0.01). The bond strength of Sucr-MA1% increased from 25.7 (±2.8) to 40.6 (±5.3) MPa after 6 months of storage. All the synthesized monomers showed some antimicrobial activity after polymerization. Gluc-MA and Chit-MA 4% and Sucr-MA 1, 2 and 4% led to decrease bacterial metabolism. Sucr-MA 1% showed better results regarding the decrease in bacterial metabolism and increasing the bond strength after 6 months of storage.
-
4. Evaluating fundamental position-dependent differences in wood cell wall adhesion using nanoindentation.
PMID:日期:2013-01Spruce wood specimens were bonded with one-component polyurethane (PUR) and urea-formaldehyde (UF) adhesive, respectively. The adhesion of the adhesives to the wood cell wall was evaluated at two different locations by means of a new micromechanical assay based on nanoindentation. One location tested corresponded to the interface between the adhesive and the natural inner cell wall surface of the secondary cell wall layer 3 (S3), whereas the second location corresponded to the interface between the adhesive and the freshly cut secondary cell wall layer 2 (S2). Overall, a trend towards reduced cell wall adhesion was found for PUR compared to UF. Position-resolved examination revealed excellent adhesion of UF to freshly cut cell walls (S2) but significantly diminished adhesion to the inner cell wall surface (S3). In contrast, PUR showed better adhesion to the inner cell wall surface and less adhesion to freshly cut cell walls. Atomic force microscopy revealed a less polar character for the inner cell wall surface (S3) compared to freshly cut cell walls (S2). It is proposed that differences in the polarity of the used adhesives and the surface chemistry of the two cell wall surfaces examined account for the observed trends.