ROBOTICS AND AUTONOMOUS SYSTEMS机器人学与自主系统
ROBOTICS AND AUTONOMOUS SYSTEMS(英文缩写 ROBOT AUTON SYST),ISSN 0921-8890,eISSN 1872-793X,中文译名:机器人学与自主系统 是一本学术期刊。本页汇总该期刊的最新影响因子、分区信息以及最新收录于 PubMed 的文献,帮助您快速了解期刊全貌。
发文量统计区间：2025-09-28 至 2026-09-28，按本站收录文献的发表日期统计。
期刊介绍
历年影响因子趋势
| JCR 数据年份 | 影响因子 | JCR 分区 |
|---|---|---|
| 2021 | 3.700 | Q2 |
| 2022 | 4.300 | Q2 |
| 2023 | 4.300 | Q1 |
| 2024 | 5.200 | Q1 |
| 2025 | 6.000 | Q1 |
ROBOTICS AND AUTONOMOUS SYSTEMS 最新收录文献
-
1. UV Disinfection Robots: A Review.
1. 紫外线消毒机器人：综述PMID:日期:2023-03-01[中文摘要] 新型冠状病毒（新冠肺炎）大流行彻底改变了我们的生活以及我们与世界的互动方式。疫情带来了对有效消毒实践的迫切需求，这些实践可以融入日常生活。需要它们来限制感染通过表面和空气的传播，特别是在公共场所。目前的大多数方法都使用化学消毒剂，这可能既费力又耗时。紫外线（UV）照射是一种经过验证的强大消毒方法。医院、长期护理院、机场和购物中心等各种公共机构对实施紫外线消毒机器人的兴趣日益浓厚。使用基于紫外线的消毒机器人可以使消毒过程更快、更高效。本文旨在为读者提供紫外线消毒的必要背景知识，并就紫外线机器人的各个方面进行相关讨论。
[英文摘要] The novel coronavirus (COVID-19) pandemic has completely changed our lives and how we interact with the world. The pandemic has brought about a pressing need to have effective disinfection practices that can be incorporated into daily life. They are needed to limit the spread of infections through surfaces and air, particularly in public settings. Most of the current methods utilize chemical disinfectants, which can be laborious and time-consuming. Ultraviolet (UV) irradiation is a proven and powerful means of disinfection. There has been a rising interest in the implementation of UV disinfection robots by various public institutions, such as hospitals, long-term care homes, airports, and shopping malls. The use of UV-based disinfection robots could make the disinfection process faster and more efficient. The objective of this review is to equip readers with the necessary background on UV disinfection and provide relevant discussion on various aspects of UV robots.
-
2. An analysis of international use of robots for COVID-19.
PMID:日期:2022-02-01This article analyses data collected from press reports, social media, and the scientific literature on 338 instances of robots used explicitly in response to COVID-19 from 24 Jan, 2020, to 23 Jan, 2021, in 48 countries. The analysis was guided by four overarching questions: (1) What were robots used for in the COVID-19 response? (2) When were they used? (3) How did different countries innovate? and 4) Did having a national policy on robotics influence a country's innovation and insertion of robotics for COVID-19? The findings indicate that robots were used for six different sociotechnical work domains and 29 discrete use cases. When robots were used varied greatly on the country; although many countries did report an increase at the beginning of their first surge. To understand the findings of how innovation occurred, the data was examined through the lens of the technology's maturity according to NASA's Technical Readiness Assessment metrics. Through this lens, findings note that existing robots were used for more than 78% of the instances; slightly modified robots made up 10%; and truly novel robots or novel use cases constituted 12% of the instances. The findings clearly indicate that countries with a national robotics initiative were more likely to use robotics more often and for broader purposes. Finally, the dataset and analysis produces a broad set of implications that warrant further study and investigation. The results from this analysis are expected to be of value to the robotics and robotics policy community in preparing robots for rapid insertion into future disasters.
-
3. A collaborative robot for COVID-19 oropharyngeal swabbing.
PMID:日期:2022-02-01The coronavirus disease 2019 (COVID-19) outbreak has increased mortality and morbidity world-wide. Oropharyngeal swabbing is a well-known and commonly used sampling technique for COVID-19 diagnose around the world. We developed a robot to assist with COVID-19 oropharyngeal swabbing to prevent frontline clinical staff from being infected. The robot integrates a UR5 manipulator, rigid-flexible coupling (RFC) manipulator, force-sensing and control subsystem, visual subsystem and haptic device. The robot has strength in intrinsically safe and high repeat positioning accuracy. In addition, we also achieve one-dimensional constant force control in the automatic scheme (AS). Compared with the rigid sampling robot, the developed robot can perform the oropharyngeal swabbing procedure more safely and gently, reducing risk. Alternatively, a novel robot control schemes called collaborative manipulation scheme (CMS) which combines a automatic phase and teleoperation phase is proposed. At last, comparative experiments of three schemes were conducted, including CMS, AS, and teleoperation scheme (TS). The experimental results shows that CMS obtained the highest score according to the evaluation equation. CMS has the excellent performance in quality, experience and adaption. Therefore, the proposal of CMS is meaningful which is more suitable for robot-sampling.
-
4. Area-Coverage Planning for Spray-based Surface Disinfection with a Mobile Manipulator.
PMID:日期:2022-01-01The use of robots has significantly increased to fight highly contagious diseases like SARS-COV-2, Ebola, MERS, and others. One of the important applications of robots to fight such infectious diseases is disinfection. Manual disinfection can be a time-consuming, risky, labor-intensive, and mundane, and humans may fail to disinfect critical areas due to the resulting fatigue. Autonomous or semi-autonomous mobile manipulators mounted with a spray nozzle at the end-effector can be very effective in spraying disinfectant liquid for deep disinfection of objects and surfaces. In this paper, we present an area-coverage planning algorithm to compute a path that the nozzle follows to disinfect surfaces represented by their point clouds. We project the point cloud on a plane and produce a polygon on which we generate multiple spray paths using our branch and bound-based tree search area-coverage algorithm such that the spray paths cover the entire area of the polygon. An appropriate spray path is chosen using a robot capability map-based selection criterion. We generate mobile manipulator trajectories using successive refinement-based parametric optimization so that the paths for the nozzle are followed accurately. Thereafter, we need to make sure that the joint velocities of the mobile manipulator are regulated appropriately such that each point on the surface receives enough disinfectant spray. To this end, we compute the time intervals between the robot path waypoints such that enough disinfectant liquid is sprayed on all points of the point cloud that results in thorough disinfection of the surface, and the particular robot path is executed in the minimum possible time. We have implemented the area-coverage planning and mobile manipulator motion planning on five test scenarios in simulation using our ADAMMS-SD (Agile Dexterous Autonomous Mobile Manipulation System for Surface Disinfection) robot. We benchmark our spray path generation algorithm with three competing methods by showing that the generated paths are significantly more efficient in terms of area coverage and reducing disinfectant wastage. We also show the time interval computation between successive waypoints results in thorough disinfection of surfaces.
-
5. Occupant-centric robotic air filtration and planning for classrooms for Safer school reopening amid respiratory pandemics.
PMID:日期:2022-01-01Coexisting with the current COVID-19 pandemic is a global reality that comes with unique challenges impacting daily interactions, business, and facility maintenance. A monumental challenge accompanied is continuous and effective disinfection of shared spaces, such as office/school buildings, elevators, classrooms, and cafeterias. Although ultraviolet light and chemical sprays are routines for indoor disinfection, they irritate humans, hence can only be used when the facility is unoccupied. Stationary air filtration systems, while being irritation-free and commonly available, fail to protect all occupants due to limitations in air circulation and diffusion. Hence, we present a novel collaborative robot (cobot) disinfection system equipped with a Bernoulli Air Filtration Module, with a design that minimizes disturbance to the surrounding airflow and maneuverability among occupants for maximum coverage. The influence of robotic air filtration on dosage at neighbors of a coughing source is analyzed with derivations from a Computational Fluid Dynamics (CFD) simulation. Based on the analysis, the novel occupant-centric online rerouting algorithm decides the path of the robot. The rerouting ensures effective air filtration that minimizes the risk of occupants under their detected layout. The proposed system was tested on a 2 × 3 seating grid (empty seats allowed) in a classroom, and the worst-case dosage for all occupants was chosen as the metric. The system reduced the worst-case dosage among all occupants by 26% and 19% compared to a stationary air filtration system with the same flow rate, and a robotic air filtration system that traverses all the seats but without occupant-centric planning of its path, respectively. Hence, we validated the effectiveness of the proposed robotic air filtration system.
-
6. Robotics and artificial intelligence in healthcare during COVID-19 pandemic: A systematic review.
PMID:日期:2021-12-01The outbreak of the COVID-19 pandemic is unarguably the biggest catastrophe of the 21st century, probably the most significant global crisis after the second world war. The rapid spreading capability of the virus has compelled the world population to maintain strict preventive measures. The outrage of the virus has rampaged through the healthcare sector tremendously. This pandemic created a huge demand for necessary healthcare equipment, medicines along with the requirement for advanced robotics and artificial intelligence-based applications. The intelligent robot systems have great potential to render service in diagnosis, risk assessment, monitoring, telehealthcare, disinfection, and several other operations during this pandemic which has helped reduce the workload of the frontline workers remarkably. The long-awaited vaccine discovery of this deadly virus has also been greatly accelerated with AI-empowered tools. In addition to that, many robotics and Robotics Process Automation platforms have substantially facilitated the distribution of the vaccine in many arrangements pertaining to it. These forefront technologies have also aided in giving comfort to the people dealing with less addressed mental health complicacies. This paper investigates the use of robotics and artificial intelligence-based technologies and their applications in healthcare to fight against the COVID-19 pandemic. A systematic search following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) method is conducted to accumulate such literature, and an extensive review on 147 selected records is performed.
-
7. A GPU-Accelerated Model-Based Tracker for Untethered Submillimeter Grippers.
PMID:日期:2018-05-01Miniaturized grippers that possess an untethered structure are suitable for a wide range of tasks, ranging from micromanipulation and microassembly to minimally invasive surgical interventions. In order to robustly perform such tasks, it is critical to properly estimate their overall configuration. Previous studies on tracking and control of miniaturized agents estimated mainly their 2D pixel position, mostly using cameras and optical images as a feedback modality. This paper presents a novel solution to the problem of estimating and tracking the 3D position, orientation and configuration of the tips of submillimeter grippers from marker-less visual observations. We consider this as an optimization problem, which is solved using a variant of the Particle Swarm Optimization algorithm. The proposed approach has been implemented in a Graphics Processing Unit (GPU) which allows a user to track the submillimeter agents online. The proposed approach has been evaluated on several image sequences obtained from a camera and on B-mode ultrasound images obtained from an ultrasound probe. The sequences show the grippers moving, rotating, opening/closing and grasping biological material. Qualitative results obtained using both hydrogel (soft) and metallic (hard) grippers with different shapes and sizes ranging from 750 microns to 4 mm (tip to tip), demonstrate the capability of the proposed method to track the agent in all the video sequences. Quantitative results obtained by processing synthetic data reveal a tracking position error of 25 ± 7 m and orientation error of 1.7 ± 1.3 degrees. We believe that the proposed technique can be applied to different stimuli responsive miniaturized agents, allowing the user to estimate the full configuration of complex agents from visual marker-less observations.
-
8. PATH OPTIMIZATION AND CONTROL OF A SHAPE MEMORY ALLOY ACTUATED CATHETER FOR ENDOCARDIAL RADIOFREQUENCY ABLATION.
PMID:日期:2015-03-01This paper introduces a real-time path optimization and control strategy for shape memory alloy (SMA) actuated cardiac ablation catheters, potentially enabling the creation of more precise lesions with reduced procedure times and improved patient outcomes. Catheter tip locations and orientations are optimized using parallel genetic algorithms to produce continuous ablation paths with near normal tissue contact through physician-specified points. A nonlinear multivariable control strategy is presented to compensate for SMA hysteresis, bandwidth limitations, and coupling between system inputs. Simulated and experimental results demonstrate efficient generation of ablation paths and optimal reference trajectories. Closed-loop control of the SMA-actuated catheter along optimized ablation paths is validated experimentally.
-
9. The Initial Development of Object Knowledge by a Learning Robot.
PMID:日期:2008-11-30We describe how a robot can develop knowledge of the objects in its environment directly from unsupervised sensorimotor experience. The object knowledge consists of multiple integrated representations: trackers that form spatio-temporal clusters of sensory experience, percepts that represent properties for the tracked objects, classes that support efficient generalization from past experience, and actions that reliably change object percepts. We evaluate how well this intrinsically acquired object knowledge can be used to solve externally specified tasks including object recognition and achieving goals that require both planning and continuous control.
-
10. The human power amplifier technology at the University of California, Berkeley.
PMID:日期:1996-01-01A human's ability to perform physical tasks is limited by physical strength, not by intelligence. We define "extenders" as a class of robot manipulators worn by humans to augment human mechanical strength, while the wearer's intellect remains the central control system for manipulating the extender. Our research objective is to determine the ground rules for the design and control of robotic systems worn by humans through the design, construction, and control of several prototype experimental direct-drive/non-direct-drive multi-degree-of-freedom hydraulic/electric extenders. The design of extenders is different from the design of conventional robots because the extender interfaces with the human on a physical level. Two sets of force sensors measure the forces imposed on the extender by the human and by the environment (i.e., the load). The extender's compliances in response to such contact forces were designed by selecting appropriate force compensators. This paper gives a summary of some of the selected research efforts related to Extender Technology, carried out during 1980s. The references, at the end of this article, give detailed description of the research efforts.