Journal of Esthetic and Restorative Dentistry美学与修复牙科杂志
Journal of Esthetic and Restorative Dentistry(英文缩写 J ESTHET RESTOR DENT),ISSN 1496-4155,eISSN 1708-8240,中文译名:美学与修复牙科杂志 是一本学术期刊。本页汇总该期刊的最新影响因子、分区信息以及最新收录于 PubMed 的文献,帮助您快速了解期刊全貌。
发文量统计区间：2025-11-01 至 2026-10-31，按本站收录文献的发表日期统计。
期刊介绍
历年影响因子趋势
| JCR 数据年份 | 影响因子 | JCR 分区 |
|---|---|---|
| 2021 | 3.040 | Q2 |
| 2022 | 3.200 | Q2 |
| 2023 | 3.200 | Q1 |
| 2024 | 4.100 | Q1 |
| 2025 | 4.600 | Q1 |
Journal of Esthetic and Restorative Dentistry 最新收录文献
-
1. Influence of Simulated Clinical Finishing/Polishing Protocols and Thermocycling on the Surface Integrity and Mechanical Performance of 3Y-TZP.
1. 模拟临床修整/抛光方案及热循环对3Y-TZP表面完整性和力学性能的影响PMID:期刊:日期:2026-10-04This in vitro study evaluated the influence of different finishing and polishing protocols associated with thermocycling aging on surface roughness, flexural strength, and topography of 3Y-TZP. Two hundred and eighty-six specimens (16 × 3 × 1 mm) were distributed into 22 groups (n = 13) according to the finishing/polishing protocol and thermocycling aging (with [18,000 cycles at 5°C and 55°C] or without aging). The groups included: control (no finishing or polishing), polishing with an intraoral polishing kit without previous finishing, positive control (laboratory polishing/glazing), and a factorial combination of finishing procedures performed using either high-speed rotation or a multiplier contra-angle, associated or not with irrigation and intraoral polishing. Surface roughness and flexural strength tests were performed, and representative specimens from each group were analyzed by scanning electron microscopy (SEM) to assess surface topography. Data were analyzed using two-way ANOVA followed by Tukey's post hoc test (α = 0.05). Surface roughness was significantly affected by the finishing/polishing protocols (p < 0.0001). The multiplier contra-angle promoted significantly greater roughness than the control (p = 0.0237) and positive control groups (p < 0.0001). No significant differences were observed in flexural strength among the groups (p > 0.05). Thermocycling aging did not significantly affect either surface roughness or flexural strength (p > 0.05). SEM analysis corroborated the roughness findings, demonstrating more irregular surface patterns after intraoral adjustment procedures. Finishing/polishing protocols influenced the 3Y-TZP surface integrity, whereas its flexural strength remained unaffected, even after thermocycling aging. Although laboratory glazing remained the most effective approach for producing smooth zirconia surfaces, careful intraoral polishing represented a clinically acceptable alternative following conservative adjustment.
-
2. Color Matching and Surface Roughness of Initial Enamel Caries After Treatment With Different Remineralizing Agents.
2. 不同再矿化剂治疗后初期釉质龋的颜色匹配与表面粗糙度PMID:期刊:日期:2026-09-30To evaluate and compare the effect of four different remineralizing agents on color matching and surface roughness of initial enamel caries. Forty maxillary central incisors were allocated into four groups (n = 10) according to the remineralizing agent used: Curodont Repair Fluoride Plus, 10% nano-hydroxyapatite, 10% nano-bioactive glass, and Fluor Protector S. Artificial caries lesions were induced by immersion in a demineralizing solution. Color was assessed using a spectrophotometer, and surface roughness was measured with a contact profilometer. Data were analyzed using one-way ANOVA and Tukey's post hoc tests (p < 0.05). Fluor Protector S exhibited the highest color change (ΔE₀₀), whereas Curodont Repair Fluoride Plus showed the lowest. Curodont Repair Fluoride Plus significantly reduced surface roughness compared with the other groups, while Fluor Protector S showed the highest roughness values. The greatest color-masking effect was observed with Curodont Repair Fluoride Plus and 10% nano-bioactive glass. Nevertheless, none of the tested treatments was able to completely restore the original enamel color. Flour Protector S showed the least effect in restoring surface smoothening compared to other materials, while Curodont Repair Fluoride Plus showed the greatest effect in reducing surface roughness of initial enamel caries. Curodont Repair Fluoride Plus may be recommended for the management of initial enamel caries due to its enhanced ability to promote favorable color integration and surface smoothening compared to other remineralizing agents, contributing to improved clinical outcomes.
-
3. Effect of Silane Incorporation on the Bonding Performance of Universal Adhesives to Dentin.
PMID:期刊:日期:2026-09-22The effect of silane in universal adhesives (UAs) on dentin adhesion remains unclear. Therefore, this study evaluated the dentin bonding of UAs with and without silane immediately and after thermocycling. Sixty-four sound human molars were randomly assigned to eight groups according to silane incorporation (UAs without silane: Scotchbond Universal [SBU] and Ambar Universal APS [AUA]; and UAs with silane: Scotchbond Universal Plus [SUP] and Ambar Universal APS Plus [AUP]), bonding strategy (etch-and-rinse [ER] or self-etch [SE]), and evaluation time (immediate or after thermocycling). Adhesives were applied to occlusal dentin and restored with composite resin. Resin-dentin sticks (0.8 mm) were prepared for microtensile bond strength (μTBS), nanoleakage (NL), and degree of conversion (DC). Data were statistically analyzed (α = 0.05). Thermocycling significantly reduced μTBS for all adhesives (p < 0.001), while silane incorporation had no effect (p = 0.31). ER showed higher μTBS than SE (p < 0.001). After thermocycling, NL was similar among adhesives in ER but differed in SE, particularly between SBU and SUP (p < 0.001). DC was unaffected by adhesive type or bonding strategy. Dentin bonding of UAs was mainly influenced by bonding strategy and aging, whereas silane incorporation showed a limited effect.
-
4. Two-Color Overlay Occlusal Adjustment for Implant-Supported Single Crowns: A Chairside Clinical Technique.
PMID:期刊:日期:2026-09-22To describe a chairside two-color overlay method for qualitative comparison of occlusal contact markings recorded before and after seating an implant-supported single crown. Baseline contacts are recorded on adjacent and opposing natural teeth while the implant site remains edentulous, using one surface color of a two-sided articulating medium. After definitive crown seating, contacts are recorded under the same conditions with the opposite color. Coincidence and noncoincidence of the two markings are used as visual references during routine clinical assessment and conservative refinement. The technique is intended for selected patients with stable occlusion, maintained vertical dimension, reproducible maximal intercuspal position, and reliable reference teeth. It provides neither force nor timing measurements, and interpretation remains operator dependent. The two-color overlay method is a qualitative chairside aid intended to support clinician understanding and control during occlusal adjustment. It should not be interpreted as establishing greater restorative predictability, accuracy, or clinical superiority. Prospective comparative studies are required to determine criterion validity, examiner reliability, and clinical outcomes. This chairside workflow provides a qualitative visual aid for comparing baseline and post-seating occlusal markings in selected patients with stable occlusion and reliable reference teeth. Its intended role is to support clinician understanding and control during adjustment, not to quantify force or timing or to establish greater restorative predictability. Potential clinical advantages require confirmation in prospective comparative studies.
-
5. Partial Mock-Up-Guided Rehabilitation of Severe Tooth Wear: A Clinical Technique.
PMID:期刊:日期:2026-09-19This article describes a staged temporary occlusal protocol for selected patients with severe tooth wear and altered mandibular closure, illustrated through a clinical case. Advanced tooth wear may be associated with a protrusive mandibular posture, reduced posterior support, and incisal-dominant function. A structured temporary occlusal phase based on a bonded resin mock-up can be used to progressively re-establish posterior support while controlling anterior contacts. Clinical evaluation, combined with adjunctive functional monitoring when available, may help assess adaptation and guide refinement of the occlusal scheme before definitive treatment. A structured temporary phase may provide a clinical option for reassessing occlusal relationships and refining the definitive rehabilitation plan in selected complex situations. Temporary occlusal rehabilitation may serve as a reversible evaluative phase in the management of selected patients with severe tooth wear associated with reduced posterior support, persistent anterior contacts, and a protrusive mandibular closure pattern.
-
6. Performance and Time Efficiency of Artificial Intelligence-Based Programs for the Automatic Design of Occlusal Devices and Restorations: A Systematic Review.
PMID:期刊:日期:2026-09-19To evaluate the accuracy and time efficiency of artificial intelligence (AI)-based programs for designing occlusal devices and tooth-supported restorations. A search was completed in 5 databases: PubMed/Medline, Scopus, Embase, Web of Science, and Cochrane. A manual search was also conducted. Studies evaluating the accuracy and time efficiency of commercially available AI-based programs for designing occlusal devices, inlays, onlays, and tooth-supported crowns and fixed dental prostheses (FDPs) were included. Two investigators evaluated the studies independently using the Joanna Briggs Institute critical appraisal. A third examiner was consulted to resolve a lack of consensus. Twenty-four studies were included: 21 evaluated single crowns (including three assessing finish-line location accuracy), two investigated inlays/onlays, one assessed occlusal device designs, and one evaluated the accuracy of AI-generated 3-unit fixed dental prostheses (FDPs). Additionally, four of the 21 studies examined the time efficiency of AI-based design software. Across all studies, AI-based programs consistently demonstrated shorter design times than conventional workflows. AI-based program performance varied by restoration type. However, the available evidence was limited and characterized by substantial heterogeneity. Therefore, further well-designed studies are required before definitive conclusions can be drawn regarding the performance of these AI-based programs.
-
7. Influence of Various Tooth Preparation Designs on Stress Distribution in Anterior Ceramic Veneers: A Systematic Review of Finite Element Analysis Studies.
PMID:期刊:日期:2026-09-17This systematic review compared the stress distribution patterns in anterior ceramic veneers with different tooth preparation designs by evaluating finite element analysis (FEA) studies, aiming to improve understanding of this biomechanical aspect related to clinical outcomes. A systematic search of PubMed, Scopus, Web of Science, and Embase, along with gray literature sources was performed (January 1990-June 2025) to identify FEA studies comparing at least two preparation designs based on a modified preparation classification. Data were extracted using a customized form, and risk of bias was assessed with the ROBFEAD tool. (PROSPERO: CRD420251127762). Out of 9576 studies, 34 were included. In veneers and cement layers, stress concentration was most observed at both incisal and cervical regions, whereas cervical concentration predominated in tooth structures. Higher loading angles increased stress values. Preparations without incisal reduction often showed stress values comparable to or greater than those with incisal reduction. Designs with palatal chamfer frequently demonstrated additional stress concentration in the palatal region. Preparation design and loading angle influence stress distribution patterns in veneer restorations; however, no single design consistently demonstrates biomechanically superior performance across all conditions. Further standardized FEA studies with clearly justified modeling assumptions are recommended.
-
8. Influence of Illumination Conditions and Cross-Polarization on DSLR-Based Clinical Tooth Color Assessment: A Comparison With Spectrophotometric Measurements.
8. 照明条件和交叉偏振对基于数码单反相机的临床牙齿颜色评估的影响：与分光光度测量的比较PMID:期刊:日期:2026-09-11To evaluate the influence of different illumination systems and cross-polarization on tooth color determination using DSLR photography, and to assess the agreement between photographic methods and spectrophotometric measurements. Thirty-one participants (62 maxillary central incisors) were included. Color measurements were obtained using a spectrophotometer under standardized conditions. Standardized DSLR photographs were taken using three illumination setups: softbox-equipped studio flash, twin flash, and twin flash with cross-polarization filter. The image area corresponding to the 5-mm probe tip was calculated, and mean L*, a*, and b* values were obtained from all pixels within this region. Color differences (ΔE) and ΔL, Δa, Δb values were calculated. Data were analyzed using repeated measures ANOVA and Friedman tests (α = 0.05). Significant differences were observed among all measurement systems for L*, a*, and b* parameters (p < 0.001). The highest color difference relative to the spectrophotometer was found in the softbox system (ΔE = 5.69), whereas twin flash (ΔE = 3.56) and cross-polarized twin flash (ΔE = 3.32) showed lower and comparable values. None of the methods produced color differences within the perceptibility threshold (ΔE ≤ 0.8). The highest proportion of clinically acceptable values (ΔE: 0.8-1.8) was observed in the twin flash group (11.3%). Lighting conditions significantly influence tooth color determination using DSLR photography, leading to variations across all color components (L*, a*, and b*). These findings indicate that different photographic setups may produce inconsistent color outcomes, highlighting the need for standardized imaging protocols in clinical practice. Illumination conditions significantly influence photographic tooth color measurements, leading to clinically relevant discrepancies. Standardization of photographic protocols is therefore essential for reliable color matching in clinical practice.
-
9. Effect of Glove-Based Color Filtering in Intraoral Scanners on the Interdental Space Reproduction Threshold Before and After Postprocessing Procedures.
9. 口内扫描仪中基于手套的颜色过滤对后处理程序前后齿间间隙再现阈值的影响PMID:期刊:日期:2026-09-11To evaluate the effect of space blockage by colored gloved fingers and color-filtering on space reproduction of 2 intraoral scanners (IOSs) for adjacent veneer preparations, before and after postprocessing. Veneer preparations were performed on two extracted teeth. Two IOSs were tested: i700 and i900. Five groups were created (from 0.1 to 0.5 mm) with four subgroups based on the glove color: none, pink, blue, and black. Specimens were assessed before and after postprocessing: no error, partial error (< 25% or 25%-50%), or complete error (> 50%). Fisher's test was used (α = 0.05). Neither IOS reproduced the 0.1- or 0.2-mm spaces before or after postprocessing, whereas both reproduced the 0.3-mm space after postprocessing, except in the black-gloved subgroup. Differences were observed in the 0.3-, 0.4-, and 0.5-mm groups before and after postprocessing. Before postprocessing, the i700 reproduced 0.3- and 0.4-mm spaces in the pink and blue subgroups and 0.5-mm spaces in the none, pink, and blue subgroups; the i900 reproduced 0.3-mm spaces in the none and blue subgroups and 0.4- and 0.5-mm spaces in the none, pink, and blue subgroups. Space reproduction threshold was 0.3 mm for both IOSs. Glove-based color filters did not enhance space reproduction. In the i700, the black-glove filter negatively affected 0.5-mm space reproduction after postprocessing.
-
10. Implications of European Union Sodium Perborate Restrictions for Intracoronal Bleaching Procedures: A Narrative Review.
10. 欧盟过硼酸钠限制对冠内漂白程序的影响：一篇叙述性综述PMID:期刊:日期:2026-09-10To critically evaluate current and emerging intracoronal bleaching agents and to provide an evidence-informed framework for clinical decision-making in the postsodium perborate era. The declining availability of sodium perborate, particularly within the European Union, has substantially altered contemporary intracoronal bleaching practice. A narrative review was conducted using a structured PubMed/MEDLINE literature search and manual reference screening. Evidence regarding bleaching efficacy, biological safety, peroxide diffusion, cervical root resorption, dentin-related effects, restorative implications, regulatory developments, and emerging bleaching materials was critically synthesized. Hydrogen peroxide, carbamide peroxide, and sodium percarbonate all achieve clinically relevant whitening but differ in biological characteristics and the strength of supporting evidence. Hydrogen peroxide remains effective but raises greater concerns regarding peroxide diffusion and concentration-dependent biological effects. Carbamide peroxide is supported by extensive contemporary clinical evidence and long-term outcome data, whereas sodium percarbonate represents a promising borate-free alternative currently supported primarily by laboratory and ex vivo studies. Among currently available intracoronal bleaching agents, carbamide peroxide is supported by one of the largest bodies of contemporary clinical literature and represents one of the most extensively documented contemporary alternatives to sodium perborate. Sodium percarbonate shows considerable potential but requires prospective clinical validation before more definitive clinical recommendations can be made. This review provides an evidence-informed framework for selecting contemporary intracoronal bleaching agents to achieve predictable esthetic outcomes in the postsodium perborate era while identifying priorities for future clinical research.